personal:hardware:3d-printing

3D Printing

MAIN PRINTER:
http://10.0.0.128/

BACKUP PRINTER:
http://10.0.0.129:5000/

CR10 PRINTER:
http://10.0.0.27:5000/

Palette 3 Pro Canvas:
https://canvas3d.io/projects

OnShape:
https://cad.onshape.com/signin

TinkerCad:
https://www.tinkercad.com/things/
https://www.tinkercad.com/things/amxfvf3WtaC-neat-hango/edit

Print Quality Troubleshooting Guide: https://www.simplify3d.com/support/print-quality-troubleshooting/

How a 3DBenchy can tell where your 3D prints need improvement: https://www.youtube.com/watch?v=t_7EMnQ6Rlc

Creality Ender 3 V2 - My Cleanest Print Ever and You Can Too!: https://www.youtube.com/watch?v=3lt_Cgbh3mU

(How) I finally got rid of these blobs!: https://www.youtube.com/watch?v=Hvw3DrVAeTA

https://the3dprinterbee.com/how-to-hide-avoid-z-seam-cura-prusaslicer/

corexy machine - CoreXY printers are a relatively new type of FDM 3D printer that use a clever motion system.

TeachingTech YouTube: https://www.youtube.com/channel/UCbgBDBrwsikmtoLqtpc59Bw
Teaching Tech 3D Printer Calibration: https://teachingtechyt.github.io/calibration.html
Acceleration Tuning: https://teachingtechyt.github.io/calibration.html#accel
Retraction Tuning: https://teachingtechyt.github.io/calibration.html#retraction

TeachingTech SuperSlicer profiles
https://github.com/teachingtechYT/SuperSlicer

3D printer calibration revolutionised - Step by step to better print quality
https://www.youtube.com/watch?v=rp3r921DBGI

3D printer calibration site V2 - Still free and better than ever!
https://www.youtube.com/watch?v=9kDK7czgMxc

Updated Marlin firmware setup guide - VS Code and Auto Build Marlin
https://www.youtube.com/watch?v=eq_ygvHF29I

  • personal/hardware/3d-printing.txt
  • Last modified: 2024/03/29 02:58
  • by jimboobrien